Wireless Home Security Camera

With a vast range of security cameras available nowadays, most of the people have installed one or the other type of security system in their place. Also, the development of wireless security cameras, you don't need any long running wires and the hassles of installing those.

Nonetheless, in light of the fact that you can easily install a wireless security camera system doesn't imply that you should. You can still mess it up. That is because, despite the plug-and-play nature of remote security cameras, there are a lot of mistakes that people tend to make during installation. How about we take a look at the most basic slip-ups you can make when installing a home surveillance camera, so as to avoid them.

  1. Not Installing Enough Cameras
    Wireless security cameras are not sufficient individually, so you should spend on more than one. No doubt, the new PTZ (pan/tilt/zoom) camera provides a wide view, however, it likely won't cover the entire area of your home. Also, every time you zoom out, the picture may get more pixelated. Rather than squinting, ensure you have enough cameras to cover all the areas, inside and outside of the home. Since you will be the one monitoring the cameras installed at your place, you can't depend on the zoom-in/out view of one camera to convey a complete look of a large space.
  2. Poor Positioning
    Much similar to when you click photographs, you have to ensure your wireless cameras are pointed at the best possible angle to get the best results. Try not to point the camera at the ground, consider obstructions, and ensure that it won't be exposed to an excessive amount of light (which could get you a useless, washed-out footage).Moreover, it's essential to ensure that you install your cameras in a zone that has a solid Wi-Fi signal. Consumers generally commit the error of putting cameras in a remote area without a solid Wi-Fi signal - this means rough video streams and connection issues. Prepare ahead by testing the range. Check Wi-Fi quality by running a Wi-Fi speed test on the web using your laptop or a cell phone. If you are not getting the required range in a desired area, you can also use a Wi-Fi extender.
  3. It's Not Totally Wireless
    With wireless security cameras, you don't need to stick your camera to an Ethernet cable or a router, though you need to use wires to power your camera. There is a select range of cameras that work on batteries. However, if the cameras are positioned at a height or you're lazy to change batteries regularly, you might be looking for something that is, even more, a permanent fixture. So, you need to pick a spot that is near an electrical plug.
  4. Forgetting the Password
    You have a lot of passwords to remember. However, when installing a security camera, you might need to add on two more to your list - yes, two.For extra security, pick a camera that requires the client to enter a specific secret key to access the camera during the setup, prefer double encryption. Generally, cameras come pre-configured with a passcode, however, you should consider setting a complex code, using a combination of numbers and letters.
  5. No Remote Access
    Undoubtedly, when installing wireless security cameras yourself, you must have an alternative to view the footage remotely. Not all cameras offer remote control and sneak peek features. It's quite simple to ensure that you are purchasing a camera that includes remote access features, though finding a camera with a preferable access mode might need some effort.

As some cameras work with iOS devices, some work with Android, and others with both, but not all might work with typical BlackBerry and Windows phones. Thus, it is up to you to choose the one that connects to the mobile devices that you own, while most of them allow access through a web portal as well.

Tags: , , ,